#
# Copyright (c) 2011, 2014, Oracle and/or its affiliates. All rights reserved.
#

#
# As a pHCI driver, scu must specify the vHCI class it belongs to (scsi_vhci)
#
ddi-vhci-class="scsi_vhci";

#
# By default, MPxIO will be disabled on all scu controllers
#
mpxio-disable="yes";

###########################################################
# the below parameters belong to SCIF_USER_PARAMETERS, for details
# please refer to scif_config_parameters.h
###########################################################

#
# whether to enable SATA NCQ feature
#
# is-sata-ncq-enabled=1;

#
# whether to enable SATA Automatic Standby Timer feature
#
# is-sata-standby-timer-enabled=0;

#
# whether to enable SATA Non-zero Buffer Offset feature
#
# is-non-zero-buffer-offsets-enabled=0;

#
# whether to clear affiliation for EA SATA devices during the
# controller stop process
#
# clear-affiliation-during-controller-stop=1;

#
# set NCQ depth, the max value is 32
#
# max-ncq-depth=32;

#
# the type of reset for the first time discovery:
#	SCI_SAS_LOGICAL_UNIT_RESET
#	SCI_SAS_I_T_NEXUS_RESET
#	SCI_SAS_HARD_RESET
#
# reset-type=SCI_SAS_LOGICAL_UNIT_RESET;

###########################################################
# end of SCIF_USER_PARAMETERS
###########################################################

############################################################
# the below parameters belong to SCIC_USER_PARAMETERS, for details
# please refer to scic_config_parameters.h
############################################################

#
# NOTIFY (ENABLE SPIN UP) primitive insertion frequency for phy
#
# notify-enable-spin-up-insertion-frequency=0x33;

#
# the number of transmitted DWORDS within which to transmit a single
# ALIGN primitive
#
# align-insertion-frequency=0x7f;

#
# the number of transmitted DWORDS within which to transmit 2 
# ALIGN primitive
#
# in-connection-align-insertion-frequency=0xff;

#
# the maximum speed generation (3G for default now)
#
# - A value of 1 indicates generation 1 (i.e. 1.5 Gb/s).
# - A value of 2 indicates generation 2 (i.e. 3.0 Gb/s).
#
# max-speed-generation=2;

#
# how long a link will remain open with no activity in increments
# of a microsecond
#
# stp-inactivity-timeout=5;
# ssp-inactivity-timeout=5;

#
# how long a link will remain open in increments of 100 microseconds
#
# stp-max-occupancy-timeout=5;
# ssp-max-occupance-timeout=20;

#
# how long a link will remain open with no outbound traffic in increments
# of a microsecond
#
# no-outbound-task-timeout=20;

###########################################################
# end of SCIC_USER_PARAMETERS
###########################################################

#
# compatible derived properties for storage FMA and diskinfo support
# NOTE: Oracle has no 'official' support for Patsburg-based SAS hardware.
#
compatible="pci8086,1d60"	hba-sas-int="iport:@ff";
compatible="pci8086,1d60"	cable-receptacle-labels="SAS0:@f0", "SAS1:@f0";
compatible="pci8086,1d60"
    ancestor-compatible="chassis.SUN-SERVER-X4-2"			
	sas-bay-labels=
	"/HDD0:@1",	"/HDD1:@2",	"/HDD2:@4",	"/HDD3:@8",
	"/HDD4:@10",	"/HDD5:@20",	"/HDD6:@40",	"/HDD7:@80";
compatible="pci8086,1d60"
    ancestor-compatible="chassis.SUN-SERVER-X4-2L"			
	sas-bay-labels=
	"/HDD0:@1",	"/HDD1:@2",	"/HDD2:@4",	"/HDD3:@8",
	"/HDD4:@10",	"/HDD5:@20",	"/HDD6:@40",	"/HDD7:@80";
compatible="pci8086,1d60"
    ancestor-compatible="chassis.Sun-Blade-X6270-M3"			
	sas-bay-labels=
	"/HDD0:@1",	"/HDD1:@2",	"/HDD2:@4",	"/HDD3:@8";
compatible="pci8086,1d60"
    ancestor-compatible="chassis.SUN-BLADE-X4-2B"			
	sas-bay-labels=
	"/HDD0:@1",	"/HDD1:@2",	"/HDD2:@4",	"/HDD3:@8";
compatible="pci8086,1d60"
    ancestor-compatible="chassis.SUN-FIRE-X4270-M3"			
	sas-bay-labels=
	"/HDD0:@1",	"/HDD1:@2",	"/HDD2:@4",	"/HDD3:@8",
	"/HDD4:@10",	"/HDD5:@20",	"/HDD6:@40",	"/HDD7:@80";
compatible="pci8086,1d60"
    ancestor-compatible="chassis.SUN-FIRE-X4275-M3"			
	sas-bay-labels=
	"/HDD0:@1",	"/HDD1:@2",	"/HDD2:@4",	"/HDD3:@8",
	"/HDD4:@10",	"/HDD5:@20",	"/HDD6:@40",	"/HDD7:@80";
compatible="pci8086,1d60"
    ancestor-compatible="chassis.SUN-FIRE-X4170-M3"			
	sas-bay-labels=
	"/HDD0:@1",	"/HDD1:@2",	"/HDD2:@4",	"/HDD3:@8",
	"/HDD4:@10",	"/HDD5:@20",	"/HDD6:@40",	"/HDD7:@80";